#618, 24' x 8.5'

Widget Didn’t Load

Check your internet and refresh this page.

If that doesn’t work, contact us.

Response #618 main views

(above photos courtesy of One3 Powerboats)

Lineage:

This hull was built by Brendan Stamps at One3 Powerboats. It is ultimately derived from our well respected 22'x8' hull and our 20' #559 which is also built by One3. This hull was scaled up from the 20', and includes aesthetic changes to the forward sheerline and chine profiles. As with most of One3's sheerlines this one includes the pipe section at the bulwark/topside intersection to create a "seamless sheer". This detail adds time and difficulty to that area of the hull construction (and is also difficult to model), and it is easily changed back to a traditional joint. Brendan is a tenacious and extremely talented fabricator and his attention to detail comes through, yet again, on this boat.

Exact copies of the design and its components, as pictured above, are not available for sale. However, please contact us if you are interested in derivative versions.

Particulars:

Length (hull):

Beam (hull):

Wt. as rigged:

Wt. Bare Hull:

Deadrise Angles-

Transom:

Sta. 4:

Cutwater:

24'

8' 6" (w/o rub rails)

3,900# (200 hp OB, batt sys.)

2,935# (w/ consoles)

14.5

45.5

Scantlings:

Bottom:

Bot. Stringers:

Chine Flats:

Sides:

Side Stringers:

Decks:

Transverse Frames:

Transom:

Keelson:

.250"

3.50" x .250"

.375"

.190"

Shelf & 3"x.250"

.190"

.190", Flanged

.250"

.375" x 4.5"

Stock Weight (approx.)-

Blank Plate: 4,050# (@ 70% yield)

Extrusion: 424#

NC Cut Parts List (pdf)