top of page

#445, 22.7' x 8.5'  Walk Thru

Lineage:

This walk-thru design was developed for Norvelle Boats. It sports the typical, relatively high sides of a pacific northwest fishing skiff.  The design was customized with rod and other storage by Norvelle whose fabricators do an excellent job.   

The bottom is more or less typical of our modified V designs with relatively steep forward sections, and since it is a single outboard, the keelson includes an integral skeg.  The engine bracket is integral to the bottom of the boat, and depending on loadings could be revised for twin outboards.

The hull lends itself to a variety of alternative deck arrangements, which we would be happy to discuss and develop.  We have done preliminary sketches for a pilothouse/cuddy arrangement as well as a 20' version of this hull, but we have not yet confirmed weights and hydrostatics for these variants.

Particulars:

Length (hull):

  Beam (hull):

Wt. as rigged:

Wt. Bare Hull:

Deadrise Angles- 

  Transom:

        Sta. 4:

  Cutwater:

22' - 8"

  8' - 5 1/2" (w/o rub rails)

3,515# (200 hp outboard)

2,374# (w/ walk thru)

     

14.5

22

54

Scantlings:

Bottom:

Bot. Stringers:

Chine Flats:

Sides:

Side Stringers:

Decks:

Transverse Frames:

Transom:

Keelson:

.250"

.190" Girder & 3.50" x .250" 

.375"

.190"

.190"  Shelf & 3" x .250"

.190"

.190", Flanged

.250" 

.375" x 4.6"  

Stock Weight (approx.)-

                    Blank Plate: 3,505# (w/ tank & walk thru)

                       Extrusion: varies

bottom of page